#include <ESP8266WiFi.h>
#include <ESP8266mDNS.h>
#include <ArduinoOTA.h>
#include <ESP8266WebServer.h>
#include <SimpleTimer.h>
#include <TimeLib.h> //https://github.com/PaulStoffregen/Time
#include <ntp_time.h>
#include <circular_log.h>


//IMPORTANT: Specify your WIFI settings:
//#define WIFI_SSID "NOS-3B26"
//#define WIFI_PASS "RMKSX2GL"
#define WIFI_SSID "MEO-AA9030"
#define WIFI_PASS "81070ce635"


//IMPORTANT: Uncomment this line if you want to enable MQTT (and fill correct MQTT_ values below):
//#define ENABLE_MQTT

#ifdef ENABLE_MQTT
//NOTE 1: if you want to change what is pushed via MQTT - edit function: pushBatteryDataToMqtt.
//NOTE 2: MQTT_TOPIC_ROOT is where battery will push MQTT topics. For example "soc" will be pushed to: "home/grid_battery/soc"
#define MQTT_SERVER        "192.168.1.123"
#define MQTT_PORT          1883
#define MQTT_USER          ""
#define MQTT_PASSWORD      ""
#define MQTT_TOPIC_ROOT    "home/grid_battery/"  //this is where mqtt data will be pushed
#define MQTT_PUSH_FREQ_SEC 2  //maximum mqtt update frequency in seconds

#include <PubSubClient.h>
WiFiClient espClient;
PubSubClient mqttClient(espClient);
#endif //ENABLE_MQTT

char g_szRecvBuff[7000];

IPAddress thisip;

ESP8266WebServer server(80);
SimpleTimer timer;
circular_log<7000> g_log;
bool ntpTimeReceived = false;
int g_baudRate = 0;

void Log(const char* msg)
{
  g_log.Log(msg);
}


/////////////////////////////////
void goWiFi(){
  // connect to WiFi
  WiFi.mode(WIFI_STA);
  WiFi.persistent(false); //our credentials are hardcoded, so we don't need ESP saving those each boot (will save on flash wear)
  WiFi.hostname("PylonBattery");
  Serial.println();
  Serial.print("connecting to ");
  Serial.println(WIFI_SSID);

  WiFi.begin(WIFI_SSID, WIFI_PASS);
  while (WiFi.status() != WL_CONNECTED) {
    delay(500);
    Serial.print(".");
  }
  Serial.println("");
  Serial.println("WiFi connected");
  Serial.println("IP address: ");
  Serial.println(WiFi.localIP());
  Serial.println("");  
  for(int i=1; i<=3; i++){
    LedBlink();
  }

}


//////////////////////////////////////////////////
void LedBlink(){
  digitalWrite(LED_BUILTIN, LOW);
  delay(150);
  digitalWrite(LED_BUILTIN, HIGH); // high = off
  delay(150);
}



//////////////////////
void setup() {

  Serial.begin(115200);
  
  pinMode(LED_BUILTIN, OUTPUT); 
  digitalWrite(LED_BUILTIN, HIGH);//high is off

  // connect to WiFi
  goWiFi();
  
//  // original wifi code
//  WiFi.mode(WIFI_STA);
//  WiFi.persistent(false); //our credentialss are hardcoded, so we don't need ESP saving those each boot (will save on flash wear)
//  WiFi.hostname("PylonBattery");
//  WiFi.begin(WIFI_SSID, WIFI_PASS);
//
//  for(int ix=0; ix<10; ix++)
//  {
//    if(WiFi.status() == WL_CONNECTED)
//    {
//      break;
//    }
//
//    delay(1000);
//  }

//    Serial.println("");
//    Serial.println("WiFi connected");  
//    Serial.println("IP address: ");
//    thisip = WiFi.localIP();
//    Serial.println( thisip );
    

  ArduinoOTA.setHostname("AndrePylon");
  ArduinoOTA.begin();
  server.on("/", handleRoot);
  server.on("/log", handleLog);
  server.on("/req", handleReq);
  server.on("/jsonOut", handleJsonOut);
  server.on("/reboot", [](){
    ESP.restart();
  });
  
  server.begin(); 
  
  syncTime();

#ifdef ENABLE_MQTT
  mqttClient.setServer(MQTT_SERVER, MQTT_PORT);
#endif

  Log("Boot event");
}

void handleLog()
{
  server.send(200, "text/html", g_log.c_str());
}

void switchBaud(int newRate)
{
  if(g_baudRate == newRate)
  {
    return;
  }
  
  if(g_baudRate != 0)
  {
    Serial.flush();
    delay(20);
    Serial.end();
    delay(20);
  }

  char szMsg[50];
  snprintf(szMsg, sizeof(szMsg)-1, "New baud: %d", newRate);
  Log(szMsg);
  
  Serial.begin(newRate);
  g_baudRate = newRate;

  delay(20);
}

void waitForSerial()
{
  for(int ix=0; ix<150;ix++)
  {
    if(Serial.available()) break;
    delay(10);
  }
}

int readFromSerial()
{
  memset(g_szRecvBuff, 0, sizeof(g_szRecvBuff));
  int recvBuffLen = 0;
  bool foundTerminator = true;
  
  waitForSerial();
  
  while(Serial.available())
  {
    char szResponse[256] = "";
    const int readNow = Serial.readBytesUntil('>', szResponse, sizeof(szResponse)-1); //all commands terminate with "$$\r\n\rpylon>" (no new line at the end)
    if(readNow > 0 && 
       szResponse[0] != '\0')
    {
      if(readNow + recvBuffLen + 1 >= (int)(sizeof(g_szRecvBuff)))
      {
        Log("WARNING: Read too much data on the console!");
        break;
      }
      
      strcat(g_szRecvBuff, szResponse);
      recvBuffLen += readNow;

      if(strstr(g_szRecvBuff, "$$\r\n\rpylon"))
      {
        strcat(g_szRecvBuff, ">"); //readBytesUntil will skip this, so re-add
        foundTerminator = true;
        break; //found end of the string
      }

      if(strstr(g_szRecvBuff, "Press [Enter] to be continued,other key to exit"))
      {
        //we need to send new line character so battery continues the output
        Serial.write("\r");
      }

      waitForSerial();
    }
  }

  if(recvBuffLen > 0 )
  {
    if(foundTerminator == false)
    {
      Log("Failed to find pylon> terminator");
    }
  }

  return recvBuffLen;
}

bool readFromSerialAndSendResponse()
{
  const int recvBuffLen = readFromSerial();
  if(recvBuffLen > 0)
  {
    server.sendContent(g_szRecvBuff);
    return true;
  }

  return false;
}

bool sendCommandAndReadSerialResponse(const char* pszCommand)
{
  switchBaud(115200);

  if(pszCommand[0] != '\0')
  {
    Serial.write(pszCommand);
  }
  Serial.write("\n");

  const int recvBuffLen = readFromSerial();
  if(recvBuffLen > 0)
  {
    return true;
  }

  //wake up console and try again:
  wakeUpConsole();

  if(pszCommand[0] != '\0')
  {
    Serial.write(pszCommand);
  }
  Serial.write("\n");

  return readFromSerial() > 0;
}

void handleReq()
{
  bool respOK;
  if(server.hasArg("code") == false)
  {
    respOK = sendCommandAndReadSerialResponse("");
  }
  else
  {
    respOK = sendCommandAndReadSerialResponse(server.arg("code").c_str());
  }

  if(respOK)
  {
    server.send(200, "text/plain", g_szRecvBuff);
  }
  else
  {
    server.send(500, "text/plain", "????");
  }
}

void handleJsonOut()
{
  if(sendCommandAndReadSerialResponse("pwr") == false)
  {
    server.send(500, "text/plain", "Failed to get response to 'pwr' command");
    return;
  }

  parsePwrResponse(g_szRecvBuff);
  prepareJsonOutput(g_szRecvBuff, sizeof(g_szRecvBuff));
  server.send(200, "application/json", g_szRecvBuff);
}

void handleRoot() {
  unsigned long days = 0, hours = 0, minutes = 0;
  unsigned long val = os_getCurrentTimeSec();
  
  days = val / (3600*24);
  val -= days * (3600*24);
  
  hours = val / 3600;
  val -= hours * 3600;
  
  minutes = val / 60;
  val -= minutes*60;
  
  static char szTmp[2500] = "";  
  snprintf(szTmp, sizeof(szTmp)-1, "<html><b>Garage Battery</b><br>Time GMT: %d/%02d/%02d %02d:%02d:%02d (%s)<br>Uptime: %02d:%02d:%02d.%02d<br><br>free heap: %u<br>Wifi RSSI: %d<BR>Wifi SSID: %s", 
            year(), month(), day(), hour(), minute(), second(), "GMT",
            (int)days, (int)hours, (int)minutes, (int)val, 
            ESP.getFreeHeap(), WiFi.RSSI(), WiFi.SSID().c_str());


  strncat(szTmp, "<BR><a href='/log'>Runtime log</a><HR>", sizeof(szTmp)-1);
  strncat(szTmp, "<form action='/req' method='get'>Command:<input type='text' name='code'/><input type='submit'></form><a href='/req?code=pwr'>Power</a> | <a href='/req?code=help'>Help</a> | <a href='/req?code=log'>Event Log</a> | <a href='/req?code=time'>Time</a>", sizeof(szTmp)-1);
  strncat(szTmp, "</html>", sizeof(szTmp)-1);
  
  server.send(200, "text/html", szTmp);
}

unsigned long os_getCurrentTimeSec()
{
  static unsigned int wrapCnt = 0;
  static unsigned long lastVal = 0;
  unsigned long currentVal = millis();

  if(currentVal < lastVal)
  {
    wrapCnt++;
  }

  lastVal = currentVal;
  unsigned long seconds = currentVal/1000;
  
  //millis will wrap each 50 days, as we are interested only in seconds, let's keep the wrap counter
  return (wrapCnt*4294967) + seconds;
}

void syncTime()
{
  //get time from NTP
  time_t currentTimeGMT = getNtpTime();
  if(currentTimeGMT)
  {
    ntpTimeReceived = true;
    setTime(currentTimeGMT);
  }  
  else
  {
    timer.setTimeout(5000, syncTime); //try again in 5 seconds
  }
}

void wakeUpConsole()
{
  switchBaud(1200);

  //byte wakeUpBuff[] = {0x7E, 0x32, 0x30, 0x30, 0x31, 0x34, 0x36, 0x38, 0x32, 0x43, 0x30, 0x30, 0x34, 0x38, 0x35, 0x32, 0x30, 0x46, 0x43, 0x43, 0x33, 0x0D};
  //Serial.write(wakeUpBuff, sizeof(wakeUpBuff));
  Serial.write("~20014682C0048520FCC3\r");
  delay(1000);

  byte newLineBuff[] = {0x0E, 0x0A};
  switchBaud(115200);
  
  for(int ix=0; ix<10; ix++)
  {
    Serial.write(newLineBuff, sizeof(newLineBuff));
    delay(1000);

    if(Serial.available())
    {
      while(Serial.available())
      {
        Serial.read();
      }
      
      break;
    }
  }
}

#define MAX_PYLON_BATTERIES 8

struct pylonBattery
{
  bool isPresent;
  long  soc;     //Coulomb in %
  long  voltage; //in mW
  long  current; //in mA, negative value is discharge
  long  tempr;   //temp of case or BMS?
  long  cellTempLow;
  long  cellTempHigh;
  long  cellVoltLow;
  long  cellVoltHigh;
  char baseState[9];    //Charge | Dischg | Idle
  char voltageState[9]; //Normal
  char currentState[9]; //Normal
  char tempState[9];    //Normal
  char time[20];        //2019-06-08 04:00:29
  char b_v_st[9];       //Normal  (battery voltage?)
  char b_t_st[9];       //Normal  (battery temperature?)

  bool isCharging()    const { return strcmp(baseState, "Charge")   == 0; }
  bool isDischarging() const { return strcmp(baseState, "Dischg")   == 0; }
  bool isIdle()        const { return strcmp(baseState, "Idle")     == 0; }
  bool isBalancing()   const { return strcmp(baseState, "Balance")  == 0; }
  

  bool isNormal() const
  {
    if(isCharging()    == false &&
       isDischarging() == false &&
       isIdle()        == false &&
       isBalancing()   == false)
    {
      return false; //base state looks wrong!
    }

    return  strcmp(voltageState, "Normal") == 0 &&
            strcmp(currentState, "Normal") == 0 &&
            strcmp(tempState,    "Normal") == 0 &&
            strcmp(b_v_st,       "Normal") == 0 &&
            strcmp(b_t_st,       "Normal") == 0 ;
  }
};

struct batteryStack
{
  int batteryCount;
  int soc;  //in %, if charging: average SOC, otherwise: lowest SOC
  int temp; //in mC, if highest temp is > 15C, this will show the highest temp, otherwise the lowest
  long currentDC;    //mAh current going in or out of the battery
  long avgVoltage;    //in mV
  char baseState[9];  //Charge | Dischg | Idle | Balance | Alarm!

  pylonBattery batts[MAX_PYLON_BATTERIES];

  bool isNormal() const
  {
    for(int ix=0; ix<MAX_PYLON_BATTERIES; ix++)
    {
      if(batts[ix].isPresent && 
         batts[ix].isNormal() == false)
      {
        return false;
      }
    }

    return true;
  }

  //in wH
  long getPowerDC() const
  {
    return (long)(((double)currentDC/1000.0)*((double)avgVoltage/1000.0));
  }

  //wH estimated current on AC side (taking into account Sofar ME3000SP losses)
  long getEstPowerAc() const
  {
    double powerDC = (double)getPowerDC();
    if(powerDC == 0)
    {
      return 0;
    }
    else if(powerDC < 0)
    {
      //we are discharging, on AC side we will see less power due to losses
      if(powerDC < -1000)
      {
        return (long)(powerDC*0.94);
      }
      else if(powerDC < -600)
      {
        return (long)(powerDC*0.90);
      }
      else
      {
        return (long)(powerDC*0.87);
      }
    }
    else
    {
      //we are charging, on AC side we will have more power due to losses
      if(powerDC > 1000)
      {
        return (long)(powerDC*1.06);
      }
      else if(powerDC > 600)
      {
        return (long)(powerDC*1.1);
      }
      else
      {
        return (long)(powerDC*1.13);
      }
    }
  }
};

batteryStack g_stack;


long extractInt(const char* pStr, int pos)
{
  return atol(pStr+pos);
}

void extractStr(const char* pStr, int pos, char* strOut, int strOutSize)
{
  strOut[strOutSize-1] = '\0';
  strncpy(strOut, pStr+pos, strOutSize-1);
  strOutSize--;
  
  
  //trim right
  while(strOutSize > 0)
  {
    if(isspace(strOut[strOutSize-1]))
    {
      strOut[strOutSize-1] = '\0';
    }
    else
    {
      break;
    }

    strOutSize--;
  }
}

/* Output has mixed \r and \r\n
pwr

@

Power Volt   Curr   Tempr  Tlow   Thigh  Vlow   Vhigh  Base.St  Volt.St  Curr.St  Temp.St  Coulomb  Time                 B.V.St   B.T.St  

1     49735  -1440  22000  19000  19000  3315   3317   Dischg   Normal   Normal   Normal   93%      2019-06-08 04:00:30  Normal   Normal  

....   

8     -      -      -      -      -      -      -      Absent   -        -        -        -        -                    -        -       

Command completed successfully

$$

pylon
*/
bool parsePwrResponse(const char* pStr)
{
  if(strstr(pStr, "Command completed successfully") == NULL)
  {
    return false;
  }
  
  int chargeCnt    = 0;
  int dischargeCnt = 0;
  int idleCnt      = 0;
  int alarmCnt     = 0;
  int socAvg       = 0;
  int socLow       = 0;
  int tempHigh     = 0;
  int tempLow      = 0;

  memset(&g_stack, 0, sizeof(g_stack));

  for(int ix=0; ix<MAX_PYLON_BATTERIES; ix++)
  {
    char szToFind[32] = "";
    snprintf(szToFind, sizeof(szToFind)-1, "\r\r\n%d     ", ix+1);

    const char* pLineStart = strstr(pStr, szToFind);
    if(pLineStart == NULL)
    {
      return false;
    }

    pLineStart += 3; //move past \r\r\n

    extractStr(pLineStart, 55, g_stack.batts[ix].baseState, sizeof(g_stack.batts[ix].baseState));
    if(strcmp(g_stack.batts[ix].baseState, "Absent") == 0)
    {
      g_stack.batts[ix].isPresent = false;
    }
    else
    {
      g_stack.batts[ix].isPresent = true;
      extractStr(pLineStart, 64, g_stack.batts[ix].voltageState, sizeof(g_stack.batts[ix].voltageState));
      extractStr(pLineStart, 73, g_stack.batts[ix].currentState, sizeof(g_stack.batts[ix].currentState));
      extractStr(pLineStart, 82, g_stack.batts[ix].tempState, sizeof(g_stack.batts[ix].tempState));
      extractStr(pLineStart, 100, g_stack.batts[ix].time, sizeof(g_stack.batts[ix].time));
      extractStr(pLineStart, 121, g_stack.batts[ix].b_v_st, sizeof(g_stack.batts[ix].b_v_st));
      extractStr(pLineStart, 130, g_stack.batts[ix].b_t_st, sizeof(g_stack.batts[ix].b_t_st));
      g_stack.batts[ix].voltage = extractInt(pLineStart, 6);
      g_stack.batts[ix].current = extractInt(pLineStart, 13);
      g_stack.batts[ix].tempr   = extractInt(pLineStart, 20);
      g_stack.batts[ix].cellTempLow    = extractInt(pLineStart, 27);
      g_stack.batts[ix].cellTempHigh   = extractInt(pLineStart, 34);
      g_stack.batts[ix].cellVoltLow    = extractInt(pLineStart, 41);
      g_stack.batts[ix].cellVoltHigh   = extractInt(pLineStart, 48);
      g_stack.batts[ix].soc            = extractInt(pLineStart, 91);

      //////////////////////////////// Post-process ////////////////////////
      g_stack.batteryCount++;
      g_stack.currentDC += g_stack.batts[ix].current;
      g_stack.avgVoltage += g_stack.batts[ix].voltage;
      socAvg += g_stack.batts[ix].soc;

      if(g_stack.batts[ix].isNormal() == false){ alarmCnt++; }
      else if(g_stack.batts[ix].isCharging()){chargeCnt++;}
      else if(g_stack.batts[ix].isDischarging()){dischargeCnt++;}
      else if(g_stack.batts[ix].isIdle()){idleCnt++;}
      else{ alarmCnt++; } //should not really happen!

      if(g_stack.batteryCount == 1)
      {
        socLow = g_stack.batts[ix].soc;
        tempLow  = g_stack.batts[ix].cellTempLow;
        tempHigh = g_stack.batts[ix].cellTempHigh;
      }
      else
      {
        if(socLow > g_stack.batts[ix].soc){socLow = g_stack.batts[ix].soc;}
        if(tempHigh < g_stack.batts[ix].cellTempHigh){tempHigh = g_stack.batts[ix].cellTempHigh;}
        if(tempLow > g_stack.batts[ix].cellTempLow){tempLow = g_stack.batts[ix].cellTempLow;}
      }
      
    }
  }

  //now update stack state:
  g_stack.avgVoltage /= g_stack.batteryCount;
  g_stack.soc = socLow;

  if(tempHigh > 15000) //15C
  {
    g_stack.temp = tempHigh; //in the summer we highlight the warmest cell
  }
  else
  {
    g_stack.temp = tempLow; //in the winter we focus on coldest cell
  }

  if(alarmCnt > 0)
  {
    strcpy(g_stack.baseState, "Alarm!");
  }
  else if(chargeCnt == g_stack.batteryCount)
  {
    strcpy(g_stack.baseState, "Charge");
    g_stack.soc = (int)(socAvg / g_stack.batteryCount);
  }
  else if(dischargeCnt == g_stack.batteryCount)
  {
    strcpy(g_stack.baseState, "Dischg");
  }
  else if(idleCnt == g_stack.batteryCount)
  {
    strcpy(g_stack.baseState, "Idle");
  }
  else
  {
    strcpy(g_stack.baseState, "Balance");
  }


  return true;
}

void prepareJsonOutput(char* pBuff, int buffSize)
{
  memset(pBuff, 0, buffSize);
  snprintf(pBuff, buffSize-1, "{\"soc\": %d, \"temp\": %d, \"currentDC\": %ld, \"avgVoltage\": %ld, \"baseState\": \"%s\", \"batteryCount\": %d, \"powerDC\": %ld, \"estPowerAC\": %ld, \"isNormal\": %s}", g_stack.soc, 
                                                                                                                                                                                                            g_stack.temp, 
                                                                                                                                                                                                            g_stack.currentDC, 
                                                                                                                                                                                                            g_stack.avgVoltage, 
                                                                                                                                                                                                            g_stack.baseState, 
                                                                                                                                                                                                            g_stack.batteryCount, 
                                                                                                                                                                                                            g_stack.getPowerDC(), 
                                                                                                                                                                                                            g_stack.getEstPowerAc(),
                                                                                                                                                                                                            g_stack.isNormal() ? "true" : "false");
}

void loop() {
#ifdef ENABLE_MQTT
  mqttLoop();
#endif
  
  ArduinoOTA.handle();
  server.handleClient();
  timer.run();

  //if there are bytes availbe on serial here - it's unexpected
  //when we send a command to battery, we read whole response
  //if we get anything here anyways - we will log it
  int bytesAv = Serial.available();
  if(bytesAv > 0)
  {
    if(bytesAv > 63)
    {
      bytesAv = 63;
    }
    
    char buff[64+4] = "RCV:";
    if(Serial.readBytes(buff+4, bytesAv) > 0)
    {
      digitalWrite(LED_BUILTIN, LOW);
      delay(5);
      digitalWrite(LED_BUILTIN, HIGH);//high is off

      Log(buff);
    }
  }
}

#ifdef ENABLE_MQTT
#define ABS_DIFF(a, b) (a > b ? a-b : b-a)
void mqtt_publish_f(const char* topic, float newValue, float oldValue, float minDiff, bool force)
{
  char szTmp[16] = "";
  snprintf(szTmp, 15, "%.2f", newValue);
  if(force || ABS_DIFF(newValue, oldValue) > minDiff)
  {
    mqttClient.publish(topic, szTmp, false);
  }
}

void mqtt_publish_i(const char* topic, int newValue, int oldValue, int minDiff, bool force)
{
  char szTmp[16] = "";
  snprintf(szTmp, 15, "%d", newValue);
  if(force || ABS_DIFF(newValue, oldValue) > minDiff)
  {
    mqttClient.publish(topic, szTmp, false);
  }
}

void mqtt_publish_s(const char* topic, const char* newValue, const char* oldValue, bool force)
{
  if(force || strcmp(newValue, oldValue) != 0)
  {
    mqttClient.publish(topic, newValue, false);
  }
}

void pushBatteryDataToMqtt(const batteryStack& lastSentData, bool forceUpdate /* if true - we will send all data regardless if it's the same */)
{
  mqtt_publish_f(MQTT_TOPIC_ROOT "soc",          g_stack.soc,                lastSentData.soc,                0, forceUpdate);
  mqtt_publish_f(MQTT_TOPIC_ROOT "temp",         (float)g_stack.temp/1000.0, (float)lastSentData.temp/1000.0, 0, forceUpdate);
  mqtt_publish_i(MQTT_TOPIC_ROOT "estPowerAC",   g_stack.getEstPowerAc(),    lastSentData.getEstPowerAc(),   10, forceUpdate);
  mqtt_publish_i(MQTT_TOPIC_ROOT "battery_count",g_stack.batteryCount,       lastSentData.batteryCount,       0, forceUpdate);
  mqtt_publish_s(MQTT_TOPIC_ROOT "base_state",   g_stack.baseState,          lastSentData.baseState            , forceUpdate);
  mqtt_publish_i(MQTT_TOPIC_ROOT "is_normal",    g_stack.isNormal() ? 1:0,   lastSentData.isNormal() ? 1:0,   0, forceUpdate);
}

void mqttLoop()
{
  //if we have problems with connecting to mqtt server, we will attempt to re-estabish connection each 1minute (not more than that)
  static unsigned long g_lastConnectionAttempt = 0;

  //first: let's make sure we are connected to mqtt
  const char* topicLastWill = MQTT_TOPIC_ROOT "availability";
  if (!mqttClient.connected() && (g_lastConnectionAttempt == 0 || os_getCurrentTimeSec() - g_lastConnectionAttempt > 60)) {
    if(mqttClient.connect("GarageBattery", MQTT_USER, MQTT_PASSWORD, topicLastWill, 1, true, "offline"))
    {
      Log("Connected to MQTT server: " MQTT_SERVER);
      mqttClient.publish(topicLastWill, "online", true);
    }
    else
    {
      Log("Failed to connect to MQTT server.");
    }

    g_lastConnectionAttempt = os_getCurrentTimeSec();
  }

  //next: read data from battery and send via MQTT (but only once per MQTT_PUSH_FREQ_SEC seconds)
  static unsigned long g_lastDataSent = 0;
  if(mqttClient.connected() && 
     os_getCurrentTimeSec() - g_lastDataSent > MQTT_PUSH_FREQ_SEC &&
     sendCommandAndReadSerialResponse("pwr") == true)
  {
    static batteryStack lastSentData; //this is the last state we sent to MQTT, used to prevent sending the same data over and over again
    static unsigned int callCnt = 0;
    
    parsePwrResponse(g_szRecvBuff);

    bool forceUpdate = (callCnt % 20 == 0); //push all the data every 20th call
    pushBatteryDataToMqtt(lastSentData, forceUpdate);
    
    callCnt++;
    g_lastDataSent = os_getCurrentTimeSec();
    memcpy(&lastSentData, &g_stack, sizeof(batteryStack));
  }
  
  mqttClient.loop();
}

#endif //ENABLE_MQTT